2015-2020 Subaru WRX

Instructions: 

1: Select your tune package.

2: Purchase your tune by following the check out procedure.

3: You will receive an email with a form to complete.

4: Fill out the form and submit back to TPG Tuning.

5: Once received we will be in contact to schedule your tune date and time!

Fed up with the persistent issue of heat soak? We completely understand your frustration!

It's high time to upgrade to an intercooler that has been specifically engineered for the 2015+ WRX, prioritizing top-notch performance. Unlike other manufacturers, we pride ourselves on the meticulous design of our cores, custom-tailored for each application. This unwavering commitment results in the absolute best-performing intercooler you can find in the market.

Our cores boast an ingenious configuration with offset and staggered internal and external fin packs. The external fin pack is densely packed to ensure maximum heat transfer, while the internal fin pack is less dense, promoting superior flow and optimizing overall performance. The true art lies in achieving the ideal balance between these two aspects, a feat we successfully accomplish for every application.

It's all too common for customers to be lured by cheaper alternatives. Unfortunately, these budget intercoolers come at a cost. Most of them employ a straight-through internal fin pack, resembling a tunnel rather than a splitter. Consequently, they yield significantly higher and hotter intake air temperatures, which in turn lead to adverse effects such as timing reduction, knock, misfires, and even detonation.

Introducing the ETS 2015+ WRX Intercooler, meticulously crafted to deliver outstanding performance!

The ETS 2015+ WRX Intercooler is designed  to perform! 

We start by strategically locating the inlets and outlets in the middle of the core, ensuring proper air distribution and optimal flow throughout. Each inlet and outlet undergoes meticulous hand porting to reduce turbulence and maximize airflow. In contrast, we've observed other manufacturers simply welding on a tube without deburring the inside, resulting in excessive turbulence that disrupts the smooth flow of air through the core.

Features:

• 3.0" 304 Stainless Steel Construction
• 304 Stainless Steel Flanges
• CNC Mandrel Bent
• Direct Factory Replacement
• Supports over 800whp!
• Gen 2 400 Cell GESI Catalytic Convertor Supports Up To 850whp! 
• Please Note this product will not fit CVT models.

Benefits!

• Significantly lowers back pressure for maximum flow and performance.
• Throaty exhaust note.
• Hand built in the USA.

Designed To Perform!

In response to changing emissions standards, GESi has developed a new proprietary coating technology and a new S-Wound core capable of effectively meeting the latest regulations, while still supporting the performance of late model high horsepower engines when needed.

• 400 Cell GEN2 Series EPA Compliant models for vehicles 2017 and newer
• Capable of supporting up to 850 HP per converter
• Custom designed S-wound core for improved strength & performance
• New proprietary coating to meet latest emissions regulations
• High quality 304 Stainless Steel construction throughout
• Double-Lock technology ensures substrate is locked in place
• Ideal for forced induction and capable of withstanding up to 1,700F/ 925

Introducing the remarkable ETS 2015+ Subaru WRX Front Mount Intercooler Piping Kit, designed to elevate your vehicle's performance to new heights. This piping kit perfectly complements the intercooler showcased here.

Crafted with precision, the ETS intercooler piping kit utilizes 2.5" OD 304 Stainless Steel tubing. Each pipe is expertly mandrel bent in a single piece, ensuring uninterrupted flow without any welds or joints that could impede performance. To enhance durability and prevent any coupler mishaps during high-intensity pulls, the ends of the pipes are skillfully beaded.

We take pride in our attention to detail, and that's why our pipes are finished with a wrinkle black powder coat, not only providing a sleek appearance but also protecting against the elements. With our industry-leading fitment, you can rest assured that installation will be a breeze, saving you valuable time.

Included in the kit are top-of-the-line ETS Black Silicone Couplers, known for their durability and reliability. These couplers ensure a secure and leak-free connection between the intercooler and piping. To further enhance performance and guarantee a tight seal, we provide high-quality SS T-Bolt Clamps.

Experience unparalleled performance, reliability, and ease of installation with the ETS 2015+ Subaru WRX Front Mount Intercooler Piping Kit. Upgrade your Subaru WRX with confidence and unleash its full potential on the road or track.

The ETS Axle-back exhaust for the 2015-2021 WRX and STI utilizes a full stainless steel construction. The axle back is 2.5" that mates to the stock 2 bolt flange. All gaskets are included to aid in ease of installation. This is the easiest way to get a little bit more noise and performance out of your WRX or STi.

THIS WILL NOT FIT THE 19-21 STI - MUST USE FULL CATBACK

Features:

- 2.5" SS Piping

- Includes Gaskets

- Quad 3.5" Double Wall tips

- Easy Installation

- Available with or without mufflers

- Increased Performance and Sound

The ETS Cat-back exhaust for the 2015-2018 WRX is a made right here in our facility. This exhaust features a true 3.0 all the way through mid-pipe that connects to the rear section splitting into two 3" pipes and finished off with quad 3.5" tips. V-band connections are utilized on all connections (except the factory 2 bolt) for a leak proof seal (no gaskets to blow out or replace!).

Features:

- True 3.0" All The Way From Mating Flange To Muffler Tips

- V-Band Connections For a Leak Proof Seal

- Quad 3.5" Double Wall SS Tips

- 41lbs = Midpipe(10lbs), Y-Pipe(7lbs), Rear Section(24lbs)

- Adapter included to fit stock down pipe

- Hardware included for aftermarket down pipe

DESCRIPTION

This COBB Stainless Steel Cat-Back Exhaust is a direct bolt on for the 2011-2021 GV and VA Subaru WRX/STI Sedan.

Construction
The entire system is constructed of 304 stainless steel and is meticulously TIG welded for outstanding appearance and durability.

Mid-pipe
At the front, a high quality cast flange is machined to accept the factory donut gasket for leak-free installation. From there, 3" stainless steel tubing runs all of the way back to another 3" cast flange where it meets the y-pipe. A flex section in this pipe adds compliance to the system.

Y-pipe
The y-pipe in this exhaust system consists of a 3" tube that is divided into twin 2.5" tubes by way of an all new cast split section. This cast section improves durability and longevity when compared to other welded splits. All three connections of the y-pipe section are made with high quality cast flanges which resist distortion and allow for a leak-free installation.

Mufflers
As with the rest of the system, the muffler sections connect to the y-pipe section using high quality cast flanges. The heart of this exhaust system are two all new bespoke COBB designed mufflers. These new muffler sections feature a single 2.5" inlet and dual 2.5" outlets that accept slip-on 3.5" dual wall, slash cut tips with laser etched COBB logos.

Gaskets

Multi-layer steel (MLS) gaskets are included for all connections to ensure a secure, leak-free installation.

All of these features add up to a premier cat-back exhaust for your VB Subaru WRX. The exhaust note is crisp and noticeable over stock without introducing unwanted drone in cabin.

Instructions: 

1: Select your tune package.

2: Purchase your tune by following the check out procedure.

3: Once your tune is ordered. You will receive an email with a form to complete.

4: Fill out the form and submit back to TPG Tuning.

5: Once received we will be in contact if further information is needed or to send out your base file. 

One hour of shop labor for installations and car services.

For customers who may be looking to finance their build and work completed to their car you can now add shop labor to your cart. Please reach out to sales@tpgtuning.com for an estimated installation time for your service prior to purchashing. This way we can insure you get the proper quantity. 

Example: If your service requires 4 hours of shop labor, you will need to enter a quantity of 4 when adding to your cart.